2016年11月29日 星期二

[LinkIt Smart 7688 Duo] Arduino com port 閃退問題

取自http://blog.cavedu.com/%E7%89%A9%E8%81%AF%E7%B6%B2/linkit/linkit-smart-7688-duo-%E4%B9%8B-arduino-com%E5%9F%A0%E9%96%83%E9%80%80%E7%AF%87/

[LinkIt Samrt 7688 Duo] Arduino IDE 編譯失敗

取自http://boywhy.blogspot.tw/2016/04/linkit-samrt-7688-arduino-ide.html?m=1

[LinkIt Smart 7688 Duo] MPU與MCU溝通方式

取自http://boywhy.blogspot.tw/2016/04/linkit-samrt-7688mpumcu.html?spref=fb&m=1

[LinkIt Smart 7688 Duo] 參考文



以下是找到的參考文:

1. GitBooks-iamblue
https://iamblue.gitbooks.io/linkit-smart-nodejs/content/zh-TW/

2.GitBooks-mediatek-labs
https://mediatek-labs.gitbooks.io/linkit-smart-7688/content/index.html

3.MakerCup LinkIt Smart 7688聊天室
https://gitter.im/MakerCup/linkit-7688

4.Cavedu教育團隊技術部落格
http://blog.cavedu.com/tag/linkit-7688/

5.Makee.io
6.MAKERPRO

a.如何為LinkIt 7688/Duo開發案進行線上更新
http://makerpro.cc/2015/12/linklt7688-linklt7688duo-ota/

b.LinkIt Smart 7688 Duo安裝與韌體升級指引
http://makerpro.cc/2015/12/linkit-smart-7688-duo-installation-guide/

c.LinkIt Smart 7688學習地圖
http://makerpro.cc/2015/12/linkit-smart-7688-learning/

d.LinkIt Smart 7688 影像串流功能
http://oranwind.org/-linkit-smart-7688-7688-chuan-jie-webcam/

d.透過MCS打造視訊串流及控制GPIO
http://makerpro.cc/2016/03/building-video-stream-and-controlling-gpio-with-mediatek-cloudsandbox/

專題文章:
1.LASS (Location Aware Sensor System) - 使用LinkIt Smart 7688
https://github.com/LinkItONEDevGroup/LASS/tree/master/Device_LinkItSmart7688Duo

2.迷你四驅車
http://oranwind.org/un/



2016年11月28日 星期一

[LinkIt Smart 7688 Duo] 其他問題

(一)更新韌體
由Web UI點選[UPGRADE FIRMWARE]後,[Upgrade firmeare file]選到目前最新版本

(二)如何回到AP模式
按住Wi-Fi按鈕5秒鐘即可從Station模式回到AP模式

(三)如何Reset LinkIt Smart 7688 Duo
1.透過板子上的按鈕
a.插上電源後請稍等約2分鐘等開機
b.按著板子上的WiFi鈕20秒
c.放開後,就會開始看到橘色燈閃爍代表reset中
d.靜置一段時間後,關查是否有新的LinkIt_Smart_7688_XXXXXX之AP出現,若有代表即完成

2.透過Web UI
a.進入Web UI後,點選頁面最下方的[Reset]
b.稍等2~3分鐘即可完成

(四)USB隨身碟重燒

[LinkIt Smart 7688 Duo] 環境建置(二) WiFi模式設定(AP mode、Station mode)

(一)設定連結指定的Wi-Fi網路
步驟一:先將7688 Duo Micro USB與PC接上,此時7688 Duo預設處於AP模式,可以提供電腦去連接。
步驟二:連上您的開發板,(例如LinkIt_Smart_7688_XXXXXX,X代表MAC addr後6碼)
步驟三:在瀏覽器輸入http://192.168.100.1,進入Web UI主控台
 1.預設帳號root
 2.密碼自行設定
步驟四:切換到Station模式,即可讓7688 Duo連到外部網路,之後只要在同一網路下的裝置都可連到它。

[LinkIt Smart 7688 Duo] 環境建置(一) Arduino IDE



(一)安裝Arduino IDE

步驟一:至arduino.cc,下載Arduino IDE 1.6.13版本。

步驟二:執行Arduino IDE 1.6.13,電腦進行安裝。


(二)安裝7688 Duo的SDK

步驟一:安裝7688的SDK(也就是7688會用到的一些函式庫),開啟Arduino IDE打開File/preferences(偏好設定),把以下的網址貼在Boards Manager URLs那一欄,(http://download.labs.mediatek.com/package_mtk_linkit_smart_7688_test_index.json)

步驟二:到Tools(工具)/Board(板子)/Boards Manager(板子管理員),在選單中尋找LinkIt Smart 7688 Duo by Seeed Studio and Mediatek Labs,安裝最新版本。


(三)安裝COM port driver

步驟一:下載COM port driver,下載路徑為http://download.labs.mediatek.com/mediatek_linkit_smart_7688_duo-windows-com-port-driver.zip

將其解壓縮,得一 linkit_smart_7688.inf 檔,對著這個檔案按滑鼠右鍵選『安裝』出現畫面後,按『仍然安裝此驅動程式軟體』。


或由以下步驟設定也可以,

步驟二:請將7688 Duo接上電腦

步驟三:在Windows裝置管理員中會被歸類在[其他裝置]中。

步驟四:更新驅動程式軟體,指到COM port driver解壓縮存放的這個位置即可。